Item
Document Count
Display language
Cleaning &
Vertical Streak Detection
Maintenance
Cleaning
Consumable counters
Scanner Settings
Authentication/License
Limited Warranty Guide/Warranty Information
Overview
The number of documents can be counted without
outputting images of the documents.
● See Also
-
Counting the Number of Documents (page 113)
You can configure the language setting for the touch
screen.
You can configure the settings for detecting dirt on
the glass.
If the scanner detects dirt on the glass, the touch
screen displays a notification on
receive a [Clean glass!] message. Clean the glass
when you receive a message.
● See Also
-
Detecting Vertical Streaks [Vertical Streak
Detection] (page 307)
-
Specifying the Sensitivity Level for Vertical Streak
Detection [Vertical Streak Sensitivity] (page 308)
Use this setting when you clean the inside of the
scanner.
● See Also
Daily Care (page 114)
-
You can check the number of sheets scanned.
After you replace a consumable or clean the scanner,
you can clear the counter.
● See Also
-
Location and Frequency (page 116)
Consumables and Replacement Cycles (page
-
127)
An administrator of the scanner uses this to configure
the settings for the scanner.
● See Also
-
Scanner Settings (Touch Screen) (page 220)
You can check the conditions of the licenses for the
authentication label and open source software.
The limited warranty guide or warranty information
can be checked.
30
Scanner Overview
when you