Fujitsu PA03768-B005 Operator's Manual page 222

Setting Items
Cleaning & Maintenance
(page 245)
USB (page 246)
Admin Password (page 246)
Restore Factory Defaults (page 247)
ATTENTION
You cannot back up or restore the scanner settings on the touch screen.
Dropout Color (page 242)
Offset (page 243)
Magnification (page 244)
Image Quality Mode
(page 244)
Cleaning cycle (page
245)
Replacement of the Pick
Roller (page 245)
Replacement of the Brake
Roller (page 245)
Maintenance cycle (page
246)
222
Description
You can exclude a color from being scanned by
selecting either red, green, or blue (three primary
colors).
Specify a starting position for scanning.
Specify the magnification level for the feed direction.
To obtain an image quality that is close to the image
quality for scanning with fi-6130Z, set the image
quality mode.
Specify the cleaning cycle for the scanner inside.
Specify the replacement cycle for the pick roller.
Specify the replacement cycle for the brake roller
Specify the maintenance and inspection cycle for the
scanner that is performed by a service engineer.
Specify how the USB function operates.
Change or disable the administrator password.
Restore the scanner settings to the factory default.
Scanner Settings (Touch Screen)