Authentication Failed - Fujitsu PA03768-B005 Operator's Manual

If the problem persists, write down the error code and contact the distributor/dealer where you purchased
this product. Refer to the contact information in the Contact List if supplied with this product, or refer to
the contact information in the Contact for Inquiries section if provided in Safety Precautions supplied with
this product, and then make an inquiry.
For M5:A5
Try again later.

Authentication Failed

If the authentication for PaperStream NX Manager fails, the [Error] screen on the touch screen displays the
following code.
M6:AF Authentication failed in Auto Login mode. Check the Auto Login Setting.
Check the message displayed in the [Error] screen, and correct the following settings:
● [Auto Login] setting on the scanner
● Authentication setting for PaperStream NX Manager
To check the network settings for the scanner, press the [Set] button.
If the problem persists, write down the error code and contact the distributor/dealer where you purchased this
product. Refer to the contact information in the Contact List if supplied with this product, or refer to the contact
information in the Contact for Inquiries section if provided in Safety Precautions supplied with this product, and
then make an inquiry.
158
Troubleshooting