Replacing The Pick Roller - Fujitsu PA03768-B005 Operator's Manual

Replacing the Pick Roller

Replace the pick roller in following procedure.
1
Turn off the scanner, unplug the power cable and wait for at least 15 minutes.
For details, refer to
2
Remove all documents from the ADF paper chute (feeder).
3
Remove the ADF paper chute (feeder).
Hold both ends of the ADF paper chute (feeder), then lift it in the direction of arrow 1 and pull it out in the
direction of arrow 2.
4
Open the ADF.
For details, refer to
CAUTION
5
Remove the pick roller.
How to Turn the Power OFF (page
How to Open the ADF (page
When the ADF is open, it might close accidentally. Be careful not to get your fingers
caught.
57).
63).
134
Replacing the Consumables