Connecting To A Wireless Access Point By Selecting One From The List Of Wireless Access Points - Fujitsu PA03768-B005 Operator's Manual

Connecting to a Wireless Access Point by Selecting One from the List of Wireless
Access Points
1
In the screen for selecting a configuration method, select [Select an Access Point] and press the [Next]
button.
2
Check the setting items and the order of them, and then press the [Start] button.
A list of wireless access points is displayed.
3
Select the wireless access point that you want to connect to, and then press the [Next] button.
4
Enter the information for the wireless access point.
Enter the following:
● Security key
● Authentication Method
● User ID
● Password
● Other necessary information for connecting to a wireless access point
5
After you finish entering the necessary information, press the [Next] button.
When the connecting process is complete, the connection result is displayed.
6
Press the [Next] button.
Specify each item.
Refer to step 4 in When Connecting the Scanner via Wi-Fi (page 35).
38
Scanner Setup