Fujitsu PA03768-B005 Operator's Manual page 221

Setting Items
Paper Source/Feeding
(page 232)
Paper Protection (page
238)
Image (page 241)
Wired LAN (page 228)
Server (page 228)
Network Encryption (page
230)
Check connection (Ping)
(page 230)
Pre-Pick (page 232)
Retry Paper Feeding
(page 232)
Multifeed Detection (page
232)
Multifeed Detection Area
(page 234)
Intelligent Multifeed
Detection (page 235)
Manual Feeding (page
236)
High Altitude Mode (page
236)
Paper protection (page
238)
Paper Protection (Touch
Screen Settings) (page
239)
Prioritize the touch screen
settings (page 239)
Automatic Page Size
Detection (page 241)
Page Edge Filler Area
(page 241)
221
Description
Configure the settings for wired LAN.
Configure the settings for a server, which is to be
connected to the scanner.
Specify whether to encrypt network communications.
Check the communication status between the scanner
and the connected computer.
Enable this to shorten the scanning time when
scanning continuously.
Specify the number of feeding retries when a
document is not fed from the ADF paper chute
(feeder).
Configure the settings to detect overlapped
documents during a scan.
Specify an area to detect overlapped documents.
Configure the setting to automatically ignore certain
patterns of overlapped documents when the setting
to detect overlapped documents is enabled.
Configure the settings when manually loading and
scanning one sheet at a time.
Enable this mode to use the scanner at an altitude of
2,000 m or higher.
Configure the setting to detect feeding errors.
Enable this option when you want some settings to
be prioritized over the settings for [Paper Protection]
and the Software Operation Panel.
When the scanner is set to detect the paper size
automatically, specify whether or not to optimize
(round up/down) the fractional part of the scanned
image.
Configure the settings to fill in the shadow or streaks
around the edge of the scanned image.
Scanner Settings (Touch Screen)