Fujitsu PA03768-B005 Operator's Manual page 124

HINT
If it is difficult to clean, use a cotton swab.
Feed Roller (× 2)/Eject Roller (× 2)
The power must be turned on to rotate the feed/eject rollers for cleaning.
a
Plug in the power cable and turn on the scanner.
For details, refer to
b
On the touch screen, press
Wipe].
The [Cleaning Wipe] screen is displayed.
ATTENTION
Do not start scanning with an image scanning application during cleaning.
c
Open the ADF.
For details, refer to
How to Turn the Power ON (page
→ [Cleaning & Maintenance] → [Cleaning] → [Cleaning
How to Open the ADF (page
124
56).
63).
Daily Care