Specifying The Area To Detect Overlapped Documents; Detection] - Fujitsu PA03768-B005 Operator's Manual

Specifying the Area to Detect Overlapped Documents [Document check area
specification for Multifeed Detection]
Specify an area to detect overlapped documents.
Specify this item when [Check Overlapping(Ultrasonic)] or [Check Overlapping and Length] is selected for
[Multifeed].
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [Document check area specification for Multifeed

Detection].

Select the [Selected range] check box in the window.
3
Specify the detection range.
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
248).
293