Advertisement
Overview
EKI-3725
EKI-3728
Power Connection
The EKI-3725/3728 series switch supports dual
+12~48V
power inputs
DC
1. Insert the positive and negative wires into the V+
and V- contacts on the terminal block.
2. Tighten wire-clamps to prevent the DC wires from
loosing.
Warning: This is a Class A product. In domestic envi-
ronment this product may cause radio interference in
which case the user may be required to take adequate
measures.
2
Startup Manual
DIN-rail Mounting
Wall Mounting
DC12~48V
Mounting
1. Hang the device to
the DIN-rail.
2.Hook the device over
the DIN rail and let it
drop down straight to
slide over the rail
smoothly.
1. Attach the brackets
included to the switch
with screws.
2.With the brackets
attached, hang the switch to
nails on the wall.
Advertisement
