Table of Contents
Advertisement
Hold
ON OFF
Relative
Show Info
ON OFF
Configure
Auto Range
Switch Range
Current
mA 10A
(Only for current
measurement)
DMM Information Window
The Multimeter Information Window is displayed on the top right of the screen.
9
8
7
Description
1. Manual/Auto range indicators, MANUAL refers to the measuring range in manual
operation mode and AUTO refers to the measuring range in automatic operation
mode.
2. Measurement mode indicators:
A
------
V
------
R
------
------
------
C
------
3. Range.
4. Measurement display ("OL" is short for overload, indicates the reading exceeds the
display range)
6.Use the Multimeter (Optional)
Freeze the display during measurement.
When making relative measurements, reading is the
difference between a stored reference value and the
input signal.
Show/Hide the information window
Select auto range mode
Select manual range mode, press to switch range
Select the current range.
1
Figure 6-3 Multimeter Information Window
Current measurement
Voltage measurement
Resistance measurement
Diode measurement
Continuity test
Capacitance measurement
2
3
108
4
5
6
Advertisement
Table of Contents
