Owon XDS3204E User Manual page 53

of the screen, for example,
windows, trigger source is CH1, polarity is positive, 0.00mV the differential between
up level and low level threshold.
Windows Trigger menu list:
MENU SETTING
Single
Windows
Mode
CH1
Source
CH2
Up Level
Threshold
Low Level
Polarity
Condition
4.Advanced User Guidebook
INSTRUCTION
Set vertical channel trigger type as Windows trigger.
Select CH1 as the trigger source.
Select CH2 as the trigger source.
Adjust the M knob or click
threshold.
Adjust the M knob or click
threshold.
Positive Polarity, the oscilloscope triggers on the
positive Windows pulse.
Negative Polarity, the oscilloscope triggers on the
negative Windows pulse.
Enter: Triggers when the trigger signal enters the
specified trigger level range.
Exit: Triggers when the trigger signal exits the
specified trigger level range.
Time: Specify the hold time of the input signal after
entering the specified trigger level. The oscilloscope
triggers when the accumulated hold time is greater than
the windows time. Available range is 30ns-10s, default
100ns.
46
，indicates that trigger type is
to set the up level
to set the low level