To Set The Offset; To Set The High Level; To Set The Low Level; To Output Square Signals - Owon XDS3204E User Manual

5.Use the Arbitrary Function Generator (Optional)

To Set the Offset

Select Offset in the right menu (if Offset is not displayed, select Low Level and select it
again to switch to Offset). Set the parameter in the right menu.

To Set the High Level

Select High Level in the right menu (if High Level is not displayed, select Amplitude
and select it again to switch to High Level). Set the parameter in the right menu.

To Set the Low Level

Select Low Level in the right menu (if Low Level is not displayed, select Offset and
select it again to switch to Low Level). Set the parameter in the right menu.

To Output Square Signals

The parameters of Square waveform are: Frequency/Period, Start Phase, Amplitude/High
Level, Offset/Low Level.
To set the Frequency/Period, Start Phase, Amplitude/High Level, Offset/Low Level, please
refer to To Output Sine Signals on page 99.

To Output Ramp Signals

The parameters of Ramp waveform are: Frequency/Period, Start Phase, Amplitude/High
Level, Offset/Low Level, Symmetry.
To set the Frequency/Period, Start Phase, Amplitude/High Level, Offset/Low Level, please
refer to To Output Sine Signals on page 99.

To Set the Symmetry of Ramp

Select Symmetry in the right menu of Ramp. Set the parameter in the right menu.

To Output Pulse Signals

The parameters of Pulse waveform are: Frequency/Period, Start Phase, Amplitude/High
Level, Offset/Low Level, Width/Duty Cycle.
To set the Frequency/Period, Start Phase, Amplitude/High Level, Offset/Low Level, please
refer to To Output Sine Signals on page 99.

To Set the Pulse Width of Pulse

Select Width in the right menu (if Width is not displayed, select Duty Cycle and select it
again to switch to Width). Set the parameter in the right menu.

To Set the Duty Cycle of Pulse

Select Duty Cycle in the right menu (if Duty Cycle is not displayed, select Width and
select it again to switch to Duty Cycle). Set the parameter in the right menu.

To Output Arbitrary Signals

The menu items of Arbitrary waveform are: Frequency/Period, Start Phase,
101