Panel Mounting; Figure 3-8: Secure The Panel Pc; Figure 3-9: Cutout Dimensions - IEI Technology AFL3-W07A-AL User Manual

Figure 3-8: Secure the Panel PC

3.6.2 Panel Mounting

To mount the AFL3-W07A-AL flat bezel panel PC into a panel, please follow the steps
below.
Step 1: Select the position on the panel to mount the flat bezel panel PC.
Step 2:
Cut out a section corresponding to the size shown below. The size must be
smaller then the outer edge.

Figure 3-9: Cutout Dimensions

Page 22
AFL3-W07A-AL Panel PC