Panel Mounting; Ppc-3708A-N26 And Ppc-3710A-N26; Figure 3-25: Secure The Chassis - IEI Technology PPC-37xxA-N26 User Manual

the wall ( F igure 3-25). This step is to avoid the panel PC being pushed apart
7
from the wall-mounting bracket accidentally.

Figure 3-25: Secure the Chassis

3.10.2 Panel Mounting

3.10.2.1 PPC-3708A-N26 and PPC-3710A-N26

To mount the PPC-3708A-N26 or PPC-3710A-N26 panel PC into a panel, please follow
the steps below.
Select the position on the panel to mount the PPC-37xxA-N26.
Step 1:
Cut out a section of the panel that corresponds to the rear panel dimensions of
Step 2:
the panel PC. The recommended cutout sizes are shown below (Figure 3-26
and Figure 3-27).
Page 38
PPC-37xxA-N26 Panel PC
Step 0: