Table 1-1: System Specifications - IEI Technology AFL3-W07A-AL User Manual

AFL3-W07A-AL Panel PC
Power Consumption
PoE (PD)
Safety/EMC
Erp
I/O Ports and Switches

Table 1-1: System Specifications

NOTE:
When both DC-in and PoE are connected to the device, the DC-in will be used as
the main power source. Disconnecting DC-in while the system is running may lead
to system shutdown or reboot.
To switch to the PoE mode, shut down the system, disconnect DC-in, and provide
power through the PoE port.
12 V @ 2.17 A
Supported by on-board PoE chip
51-57V DC, 0.5A max. (for IEEE802.3at)
CE, FCC class A
ErP 2009/125/EC
2 x GbE LAN (RJ-45, one supports PoE)
2 x USB 3.1 Gen 1 (5Gb/s) connectors
2 x USB 2.0 connectors
1 x 12 V DC input jack
1 x Power button
1 x Reset button
1 x Clear CMOS button
1 x AT/ATX switch
Page 7