Stand Mounting; Figure 3-17: Arm Mounting - IEI Technology AFL3-W07A-AL User Manual

Figure 3-17: Arm Mounting

3.6.5 Stand Mounting

To mount the AFL3-W07A-AL using the stand mounting kit, please follow the steps below.
Step 1: Locate the screw holes on the rear of the AFL3-W07A-AL. This is where the
bracket will be attached.
Step 2: Align the bracket with the screw holes.
Step 3:
To secure the bracket to the AFL3-W07A-AL insert the retention screws into the
screw holes and tighten them.
Page 30
AFL3-W07A-AL Panel PC