Figure 3-11: Securing Panel Mounting Brackets - IEI Technology AFL3-W07A-AL User Manual

Step 6: Align the panel mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 7: Secure the two panel mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes and tightening them
(Figure 3-11).S t e p 0 :
NOTE:
The panel mounting kit described in this section is an optional item. To
purchase it, please contact an IEI sales representative.

Figure 3-11: Securing Panel Mounting Brackets

Page 24
AFL3-W07A-AL Panel PC