Panel Mounting; Figure 4-11: Secure The Panel Pc; Figure 4-12: Cutout Dimensions - IEI Technology AFL2-08A-N26 Series User Manual

AFL2-08A-N26

Figure 4-11: Secure the Panel PC

4.11.2 P a n e l Mo u n tin g
To mount the AFL2-08A-N26 flat bezel panel PC into a panel, please follow the steps
below.
Select the position on the panel to mount the flat bezel panel PC.
S te p 1:
S te p 2: Cut out a section corresponding to the size shown below. The size must be
smaller than the outer edge.

Figure 4-12: Cutout Dimensions

P a g e 33