Panel Mounting - IEI Technology AFL3-W15C-ULT3 User Manual

Figure 3-23: Secure the Panel PC

3.12.2 Panel Mounting

To mount the AFL3-W15C/W19C-ULT3 flat bezel panel PC into a panel, please follow the
steps below.
Step 1: Select the position on the panel to mount the panel PC.
Cut out a section corresponding to the size shown below. The size must be
Step 2:
smaller then the outer edge.
Figure 3-24: AFL3-W15C-ULT3 Cutout Dimensions
Page 36
AFL3-W15C/W19C-ULT3 Panel PC