Arm Mounting; Figure 3-15: Install Into A Rack/Cabinet - IEI Technology AFL3-W07A-AL User Manual

Figure 3-15: Install into a Rack/Cabinet

Step 7: Once the panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 3-15).

3.6.4 Arm Mounting

The AFL3-W07A-AL is VESA (Video Electronics Standards Association) compliant and
can be mounted on an arm with a 75 mm interface pad. To mount the AFL3-W07A-AL on
an arm, please follow the steps below.
Step 1:
The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
Page 28
AFL3-W07A-AL Panel PC