Turn Off The Power; Removing The - IEI Technology AFL3-W07A-AL User Manual

AFL3-W07A-AL Panel PC

5.3 Turn off the Power

WARNING:
Failing to turn off the system before opening it can cause permanent
damage to the system and serious or fatal injury to the user.
Before any maintenance procedures are carried out on the system, make sure the system
is turned off.
5.4 Removing the Back Cover
WARNING:
Over-tightening back cover screws will crack the plastic frame.
Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm).
To access the AFL3-W07A-AL internally the back cover must be removed. To remove the
back cover, please follow the steps below.
Step 1: Follow all anti-static procedures. See Section 5.2.
Step 2: Turn off the power. See Section 5.3.
Page 69