Figure 3-13: Rack Mounting Kit Installation - IEI Technology AFL3-W07A-AL User Manual

2
3
Step 3: Repeat Step 4
mounting brackets.

Figure 3-13: Rack Mounting Kit Installation

Step 4: Align the rack mounting bracket screw holes with the VESA mounting holes on
the rear of the panel PC.
Step 5: Secure the two rack mounting brackets to the rear of the panel PC by inserting
the four retention screws into the VESA mounting holes and tightening them
(Figure 3-14).
Page 26
Nut
Plastic
cap
to install the other three screws into the sides of the two rack
AFL3-W07A-AL Panel PC
Tighten a nut until the spring is
compressed enough for plastic cap.
Tighten a plastic cap onto the end of
screw thread.