Table of Contents
Advertisement
Chapter 6: Utility Screen, Page 81
Press the Setup Port 0 button to view or make changes to the RS-485 port. Please refer to
Section
#9 Additional Features
for setup instructions.
6.16 Transfer Data
Data may be exported to a Multi Media Card (MMC) for added diagnostic capabilities. A
MMC needs to be installed to store the data. Refer to section
10.2.3 Updating the TP-
177B Software
for instructions to install the MMC. A card reader is required to read the
data after the card is removed from the display.
Select the XFER button on the UTIL screen to configure the data to be transferred to the
MMC.
Before you export data to the MMC, you may want to create your own file name for the
transfer. You can export various records including the calibration data, capture buffer,
verify history, and process records.
M o d e l 6 8 2 T - H P U S E R M A N U A L A T E X Z o n e 2
Advertisement
Table of Contents
