Deck Information (Diag) Display; Waveform Monitor (Wfm) Display - Panasonic AJ-PG50EJ Operating Instructions Manual

Deck Information (DIAG) Display

This displays the deck information. Deck information includes
[USER] button and warning information.
1
Press the [DIAG] button.
The [USER] button setting information appears.
After information is displayed the first time, the page dis-
played the last time will open from the next time.
Note:
• This information is not displayed when a menu is dis-
played.
• Switch the output destinations to display in the "GUI
OUTPUT" (➝ page 108) and "OSD OUTPUT" (➝ page
108) menu settings.
• Playback and other operations are not available during
DIAG display.
2
Press the left or right cursor button.
The information displayed changes with each press of the
button.
Information displayed
USER BUTTON:
Indicates the functions assigned to the USER buttons 1
to 6 and currently set values.
WARNING:
Warning and error information
(➝ "Display of warning information" page 120)

Waveform Monitor (WFM) Display

This displays a simple waveform monitor on the screen for monitoring video.
It can be displayed by setting the "WFM TYPE" (➝ page 108) menu item.
WAVE: Waveform display
VECTOR: Vector display
Note:
• Switch the output destination to display in the "OSD OUTPUT" (➝ page 108) menu item.
• This information is not displayed when a menu or thumbnail is displayed.
86
Screen Display: Deck Information (DIAG) Display
3
Press the [DIAG] button.
The previous display is redisplayed.
You can also return to the previous display by pressing the
[EXIT] or [MENU] button.