Panasonic AJ-PG50EJ Operating Instructions Manual page 101

REC/PB > TC/UB/CTL (Continued)
Item
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10 to LINE 16 to LINE 20
• When set to 50 Hz:
LINE 7 to LINE 11 to LINE 22
VITC POS-1
Note:
• The same line as the "VITC POS-2" menu item cannot be selected.
• This setting is enabled only during SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
Sets the position to insert the VITC signal.
• When set to 59.94 Hz:
LINE 10 to LINE 18 to LINE 20
• When set to 50 Hz:
LINE 7 to LINE 13 to LINE 22
VITC POS-2
Note:
• The same line as the "VITC POS-1" menu item cannot be selected.
• This setting is enabled only during SD SDI output.
• Pressing the [RESET] button will not restore the factory defaults.
Selects whether to superimpose the LTC information on HD SDI output.
HD EMBD LTC ON: Superimposes LTC.
OFF: Does not superimpose LTC.
Selects whether to superimpose the VITC information on HD SDI output.
HD EMBD VITC ON: Superimposes VITC.
OFF: Does not superimpose VITC.
REC META DATA
REC/PB > REC META DATA
Item
LOAD Loads a metadata upload file stored on an SD memory card.
Sets whether to add the loaded metadata during recording.
RECORD ON: Adds the metadata.
OFF: Does not add the metadata.
Enables/disables the function for storing the text memo with the serial number or the type of
card as metadata.
CARD SERIAL
ON: Records.
OFF: Does not record.
Sets the data to be recorded to USER CLIP NAME.
• When "RECORD" is "ON"
TYPE1: Records the loaded data setting values.
USER CLIP NAME TYPE2: Records the loaded data and counter values.
• When "RECORD" is "OFF"
TYPE1: Records the same values as GLOBAL CLIP ID.
TYPE2: Records the same values as CLIP NAME.
INITIALIZE Deletes and initializes all the loaded metadata.
PROPERTY Allows you to check and edit the loaded metadata.
Settings and brief function description
Settings and brief function description
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
101
Setup Menu: Menu List