Panasonic AJ-PG50EJ Operating Instructions Manual page 105

NETWORK
I/F SETUP > NETWORK
Item
Selects network connection method.
WLAN: Connects via a wireless LAN.
4G/LTE: Connects via 3G/4G/LTE.
LAN: Connects via the LAN connector on the unit.
NETWORK SEL
OFF: Does not use the network.
Note:
For details on a network connection, refer to "Network Connection" (➝ page 65).
NETWORK FUNC
Sets the HTTP server function.
BROWSE: Enables the P2 Browser function.
HTTP SERVER BROWSE (+CTRL): Enables the HTTP server function, starting and stopping recording from
a terminal, and time code and user bit preset control.
DISABLE: Disables the HTTP server function.
USER
Sets the user account name.
ACCOUNT
Displays the set account names. Also allows you to register a new account, delete an ac-
ACCOUNT LIST
count, or change a password.
FTP CLIENT SERVICE
Sets from where client service settings are acquired.
INTERNAL: Uses the settings set on the unit.
SD CARD:
SETTING DATA
Uses the settings of the file inside the SD memory card inserted in the SD card slot.
When this item is set to "SD CARD", insert an SD memory card before turning on the power
of the unit.
SERVER URL Sets the name or address of the connection destination server.
LOGIN USER Sets the user ID for the connection.
LOGIN PASS-
Sets the password for the connection.
WORD
Set this for transferring files using SSH.
SSH ENABLE: Uses SSH.
DISABLE: Does not use SSH.
Sets the network port number for using SSH. Set this to the same number as on the server
side.
SSH PORT
Initial setting: 22
The setting value is not displayed due to security purposes.
LOAD
Loads the settings of the client service from the SD memory card.
(SD CARD)
SAVE
Saves the settings of the client service onto the SD memory card.
(SD CARD)
Sets the rec during upload function.
REC DURING
ENABLE: Uses the rec during upload function.
UPLOAD
DISABLE: Does not use the rec during upload function.
Sets whether to enable the function to register clips recorded using the unit automatically to
the upload list when recording stops, and if enabled, sets the type of target clip.
AUTO UPLOAD REC CLIP (PROXY): Upload target is proxy data of recorded clips.
REC CLIP: Upload target is recorded clips (main recording data and proxy data).
DISABLE: Recorded clips are not upload targets.
UPLOAD LIST Displays the list information of clips to upload.
SAVE LOG Save up to the latest 1000 logs for clip information (month and date, clip number (global clip
(SD CARD) ID), status) registered in the upload list to an SD memory card.
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
105
Setup Menu: Menu List