Table of Contents
Advertisement
3)
Partition information
(for a TYPE S storage device)
:
A check mark is displayed for a partition
selected as an operation target.
NO.:
Partition number (1, 2, 3...)
MODEL:
P2 card model name
PARTITION NAME: Name assigned to partition
"Setting a partition name" (➝ page 61)
DATE:
Partition recording date
TIME:
Partition recording time
SERIAL:
P2 card serial number
Folder information
(for a FAT storage device)
:
A check mark is displayed for a folder se-
lected as an operation target.
NO.:
Folder number (1, 2, 3...)
FOLDER NAME:
Folder name (does not include the CON-
TENTS folder)
DATE:
Folder creation date
TIME:
Folder creation time
Note:
• Use the left or right cursor button to toggle between the par-
tition names and serial name for a TYPE S storage device.
• The remaining free space of the corresponding partition can
be checked in the "FREE CAP. OF PARTITION" (➝ page 92)
menu item.
4)
Storage device indicator
Indicates whether a storage device is connected and the
device type.
Operations in the EXPLORE screen
Selecting a partition or folder as a target for oper-
ation
Selecting a partition or folder as a target allows you to display
all the clips in the selected partition or folder as thumbnails.
(➝ "Displaying the Thumbnail Screen" page 40)
Up to six partitions or folders can be selected as targets for
operation.
1.
Align the cursor with a partition or folder in the EX-
PLORE screen.
2.
Hold down the [SET] button (for at least 1 second).
The partition or folder is selected and
The selected operation targets remain available until the
storage device is disconnected or the power is turned off.
To cancel an operation target selection, select it and hold
down the [SET] button again (for at least 1 second).
Pressing the [CANCEL] button cancels all selections.
• When an attempt is made to select a 7th item, the item is
not set and a warning appears.
Note:
• A clip recording that spans a partition whose MODEL has be-
1
*
come "UNKNOWN"
and another partition on a TYPE S storage
device will not become one normal clip.
1
*
When a clip is copied to a TYPE S storage device, MODEL of
the copy destination partition changes to "UNKNOWN."
• Partition names can be set for a TYPE S storage device. A set
partition name is displayed in "PARTITION NAME" in the EX-
PLORE screen.
Setting a partition name
In the case of a TYPE S storage device, a name (up to 20 char-
acters) can be assigned to a partition.
Note:
A set partition name is displayed in "PARTITION NAME" in the EX-
PLORE screen.
1.
Align the cursor with the partition you want to set in
the EXPLORE screen for the storage device.
You can also press the [SET] button to display the thumb-
nail list and then enter a partition name.
2.
Press the [MENU] button.
3.
Use the cursor buttons to align the cursor with the
"CHANGE PARTITION NAME" (➝ page 94) menu
item and press the [SET] button.
The software keyboard appears.
4.
Enter the name to set for the partition and select
"OK."
The partition name is set.
Main Mode: Thumbnail Screen
becomes
.
61
Advertisement
Table of Contents
