Table of Contents
Advertisement
Client settings
To transfer clips with the FTP function, you need to set the connection destination and other settings in advance.
Set the settings in the "FTP CLIENT SERVICE" (➝ page 105) menu item.
CLIENT SERVICE:
Item
SETTING DATA
Sets from where client service settings
are acquired.
SERVER URL
Name or address of connection desti-
nation server
LOGIN USER / LOGIN
User ID and password for connecting Enter with the full keyboard. (Up to 31 characters for the
PASSWORD
SSH
Set this to use SSH for file transfers.
SSH PORT
Set the network port number when us-
ing SSH. Set this to the same number
as on the server side.
• The set password cannot be displayed on the unit.
Note:
• When "WLAN" is set in the "NETWORK SEL" menu item and "DIRECT" is set in the "TYPE" menu item, the FTP client function will not
operate.
Saving the settings of the client service to the SD memory card
• Select "SAVE (SD CARD)" in the "FTP CLIENT SERVICE" menu item.
The settings of the "SERVER URL," "LOGIN USER," "LOGIN PASSWORD," "SSH," and "SSH PORT" menu items are saved to the SD
memory card.
Loading the settings of the client service from the SD memory card
• Select "LOAD (SD CARD)" in the "FTP CLIENT SERVICE" menu item.
The settings of the client service are loaded from the SD memory card and then reflected in the settings of the unit.
Description
INTERNAL: Uses the settings set on the unit.
SD CARD: Uses the settings of the file inside the SD
memory card inserted in the SD card slot.
When this item is set to "SD CARD", insert an SD memory
card before turning on the power of the unit.
Enter with the full keyboard. (Up to 500 characters)
user ID and up to 15 characters for the password)
ENABLE: Enables SSH.
DISABLE: Disables SSH.
Enter with the numeric keyboard.
Setting value
Main Mode: Using the Unit Connected to a Network
Factory default
setting
INTERNAL
Unset
Unset
DISABLE
22
71
Advertisement
Table of Contents
