Table of Contents
Advertisement
Item
Message
NOT SELECTED!
SAME CLIP IS
SELECTED!
TOO MANY CLIPS!
UNKNOWN CONTENTS
FORMAT!
Thumb-
UNKNOWN DATA!
nail
USER CLIP NAME
MODIFIED!
WRITE PROTECTED!
CANNOT OPERATE THIS
MENU, WHILE "REC
DURING UPLOAD"
ENABLED.
CANNOT ACCESS
CARD!
CANNOT ACCESS
TARGET!
CANNOT COPY!
FORMAT STORAGE
DEVICE TO FAT
CANNOT FORMAT!
Stor-
age
CANNOT RECOGNIZE
STORAGE DEVICE!
CANNOT SELECT!
MAX.6 PARTITIONS
CARD IS EMPTY!
CANNOT COPY!
FORMAT P2 CARD!
Description
An attempt was made to delete when no clip was
selected.
The selected clips contain multiple copies of the
same clip (duplicated by copying).
Too many clips are selected.
This warning is for when the version of the con-
tent is not compatible with the unit.
• The metadata character code is invalid.
• There is a problem with the data in the file.
Characters need to be deleted when the counter
value is added to the clip name.
The P2 card or SD memory card is write protect-
ed.
The menu cannot be executed.
An error occurred during P2 card access.
An error occurred while attempting to access the
connection target.
The clips cannot be copied because there is no
partition to which to copy clips on the storage de-
vice.
The storage device cannot be formatted.
The storage device cannot be recognized prop-
erly.
A storage device with more than six partitions
cannot be selected (simultaneous mounting of
partitions).
The P2 card to be copied is empty.
Importing to a P2 card containing clips is not
possible.
Select the clip you want to delete.
Multiple copies of the same clip (duplicated by copy-
ing) cannot be simultaneously copied. Deselect all of
the selected clips that are identical copies.
Reduce the number of selected clips.
Match the device and content versions.
• Use UTF-8 for the metadata character code.
Use the viewer to enter the correct characters.
• Create the file again.
Only up to 100 bytes can be saved for the combina-
tion of the user clip name and counter value so char-
acters are deleted automatically when the total
exceeds that amount.
Insert write-enabled media.
Change the "REC DURING UPLOAD" menu item set-
ting to "DISABLE" before executing.
Check the P2 card.
Check the storage device status and connection.
Reformat in FAT format or export the data from a P2
card to create a partition.
Connect a different storage device.
Reboot the storage device or connect a different stor-
age device.
Cancel some of the selected partitions.
Copying will not be performed since the card is emp-
ty.
Format the P2 card.
For Long and Trouble-Free Operation: Warning System
Measure
125
Advertisement
Table of Contents
