Preparing For Connection - Panasonic AJ-PG50EJ Operating Instructions Manual

Preparing for Connection

For the wireless module AJ-WM30/AJ-WM50
Connect the AJ-WM30/AJ-WM50 wireless module (sold separately) to the [USB 3.0 HOST] port on the unit.
 Notes regarding use of wireless module
For the latest information, visit the website. (➝ "Website URL" page 9)
Note:
In France, outdoor use is prohibited.
For wireless module other than AJ-WM30/AJ-WM50
Connect the 4G/LTE USB modem (sold separately) or other wireless module to the [USB3.0 HOST] port on the unit.
Note:
• For the USB 2.0 extension cable (sold separately), we recommend using a cable that is no longer than 0.5 m (19-5/8 inches) between
the Type A male and female connectors and is double shielded to reduce noise.
• For the 4G/LTE USB modems and other wireless modules that can be connected, visit Support Desk on the website.
URL" page 9)
For wired LAN
Connect the cable.
1
Connect the LAN cable to the [LAN] port at the rear.
66
Main Mode: Using the Unit Connected to a Network
LAN cable (sold separately)
(➝
"Website