Table of Contents
Advertisement
Item
Message
LACK OF CAPACITY!
MISMATCH
COMPONENT!
Stor-
age
TOO MANY PARTITIONS! There are too many partitions.
UNKNOWN DEVICE
CONNECTED!
VERIFICATION FAILED!
CANNOT CHANGE!
Soft-
CANNOT SET!
ware
key-
INVALID VALUE!
board
AUTHENTICATION
ERROR!
CANNOT CONNECT!
CANNOT FIND FTP-
SERVER!
LOGIN FAILED!
PING FAILED!
Net-
CANNOT ACCESS GATE-
work
WAY!
CHECK LAN SETTING
IP ADDRESS IS USED!
INVALID VALUE!
UPLOAD LIST ERROR!
126
For Long and Trouble-Free Operation: Warning System
Description
Not enough free space left on the storage de-
vice.
The model numbers of the copy source P2 card
and copy destination P2 card do not match.
Copying is not possible.
An unsupported DVD drive or other device is
connected.
Verification after copying failed.
An attempt was made to change PERSON when
no text memo had been entered.
The entered value is invalid.
Manual authentication failed.
A connection cannot be established to the net-
work.
The connection destination FTP server cannot be
found.
Logging in to the connection destination FTP
server failed.
The ping failed.
The gateway server cannot be accessed.
The gateway server cannot be accessed.
The set IP ADDRESS is being used by another
device.
The entered data is invalid.
Addition to the upload list failed.
Measure
Use a new storage device with enough free space or
a formatted storage device.
Use P2 cards of the same model number or import
clips individually.
The maximum number of partitions for a storage de-
vice is 23. Use a new storage device or reformat the
storage device.
Connect a supported storage device, and then turn
the power off and then back on.
Copy the data again.
First enter a text memo.
Enter a valid value.
Enter the correct password.
Check that the LAN settings are correct, LAN cable is
connected properly, and network is working properly.
Check whether the URL item of FTP CLIENT is cor-
rect.
Check whether the USER ID and USER PASSWORD
items of FTP CLIENT are correct.
Check that the LAN settings and the URL item of FTP
CLIENT are correct, LAN cable is connected proper-
ly, and network is working properly.
Check that the LAN settings are correct.
Check that the LAN settings are correct.
Consult with the network administrator and then set
another IP ADDRESS.
Enter data in a valid range.
• Configure "REC DURING UPLOAD" (➝ page 105)
again.
• Check whether the registration limit (100 entries) for
the upload list has been reached.
Advertisement
Table of Contents
