Table of Contents
Advertisement
USER BUTTON
I/F SETUP > USER BUTTON
You can assign specific functions set in menus to the [USER1] to [USER6] buttons.
The settings are stored internally and retained even when the unit is turned off and on. The assigned functions and settings can
be confirmed in the DIAG display.
Item
TEXT MEMO: Functions as the text memo button.
MARKER: Functions as the shot marker ON/OFF button.
DELETE: Functions as the "DELETE" shortcut button.
FORMAT: Functions as the "FORMAT" shortcut button.
COPY: Functions as the "COPY" shortcut button.
EXPORT: Functions as the "EXPORT" shortcut button.
EXPLORE: Functions as the "EXPLORE" shortcut button.
CLIP PROPERTY: Functions as the "CLIP PROPERTY" shortcut button.
CARD STATUS: Functions as the "CARD STATUS" shortcut button.
1 CLIP PLAY: Functions as the "ONE CLIP PLAY" button.
SLOT CLIPS:
Switches the thumbnail screen display between "SELECTED CLIPS" ➝ "SLOT1" ➝ "SLOT2" ➝.
SLOT SEL: Changes the P2 card slot for recording.
REC MEDIA: Changes the "REC/PB SETUP" - "REC MEDIA" settings.
DATA DISPLAY: Changes the "DATA DISPLAY" settings.
SEEK POS SEL: Changes the "SEEK POS SEL" settings.
CTL DISPLAY: Changes the "CTL DISPLAY" settings.
TCG MODE: Changes the "TCG MODE" settings.
USER1
UBG MODE: Changes the "UBG MODE" settings.
RUN MODE: Changes the "RUN MODE" settings.
EXT TC SEL: Changes the "EXT TC SEL" settings.
VIDEO IN SEL: Changes the "INPUT SEL" (VIDEO) settings.
INT SG: Changes the "VIDEO" - "INT SG" settings.
AUDIO IN SEL: Changes the "INPUT SEL" (AUDIO) settings.
MONITOR CH: Changes the "MONITOR CH" settings.
GUI OUTPUT: Changes the "GUI OUTPUT" settings.
OSD OUTPUT: Changes the "OSD OUTPUT" settings.
OSD GRADE: Changes the "OSD GRADE" settings.
WFM TYPE: Changes the "WFM TYPE" settings.
REC D.UP: Changes the "REC DURING UPLOAD" settings.
UP LIST: Functions as the "UPLOAD LIST" shortcut button.
STREAMING: Changes the "STREAMING" settings.
LOAD SETUP DATA: Functions as the "SETUP DATA" - "LOAD" shortcut button.
NO ASSIGN: A function is not assigned.
Note:
The same item can be assigned to other [USER] buttons.
The settings are the same as "USER1".
USER2
The factory default setting is MONITOR CH.
The settings are the same as "USER1".
USER3
The factory default setting is TEXT MEMO.
The settings are the same as "USER1".
USER4
The factory default setting is REC MEDIA.
The settings are the same as "USER1".
USER5
The factory default setting is SLOT SEL.
The settings are the same as "USER1".
USER6
The factory default setting is MARKER.
110
Setup Menu: Menu List
Settings and brief function description
_ is the factory default setting.
FREQ indications
59.94Hz
50Hz
Advertisement
Table of Contents
