Table of Contents
Advertisement
THUMBNAIL:
Frame position (normally, start: 0) of
the image used for the thumbnail and
the thumbnail size (width, height)
PROXY:
Detailed information on proxy data
(Format, video codec, video frame
rate, video bit rate, video resolution,
aspect ratio, TC superimposition on
video, audio codec, audio bit rate,
sampling rate, and number of chan-
nels)
Changing clip metadata
Clip metadata can be changed.
1
Display the clip metadata.
2
Use the cursor buttons to align the cursor with the
metadata you want to edit and press the [SET] but-
ton.
The data that can be edited is indicated as "TEXT," like in
the figure below.
3
Use the cursor buttons to move to the item you want
to change and press the [SET] button.
The screen for changing the metadata appears.
(➝ "Using a Keyboard" page 117)
4
After you finish making changes, select "OK."
The changes made to the metadata are saved to the clip
and the metadata display reappears.
Select [EXIT] to cancel the changes and return to the pre-
vious display.
Note:
• To delete the latitude and longitude, enter a blank space for
the altitude. They cannot be deleted separately.
• The metadata of an incomplete clip with the
cannot be changed. Insert the P2 card(s) containing the re-
mainder of the clip.
• The MEMO item cannot be changed if a memo of 100 char-
acters or more has been added.
5
Press the [EXIT] button to end the process.
Changing Thumbnails
A thumbnail can be changed to the image at a position with a
text memo added.
1
Add a text memo to the video you want to change.
(➝ "Adding text memos" page 47)
2
Change the thumbnail display to the text memo dis-
play.
Select "TEXT MEMO CLIPS" in the "REPOSITION" (➝
page 92) menu item.
3
Use the cursor buttons to move to the thumbnail to be
changed and press the [SET] button.
The cursor moves to the bottom.
4
Use the left or right cursor button to move to the
thumbnail you want to change.
5
Press the [MENU] button.
6
Use the cursor buttons to align the cursor with the
"EXCH. THUMBNAIL" (➝ page 93) menu item and
press the [SET] button.
7
Align the cursor with "YES" in the confirmation mes-
sage and press the [SET] button.
The menu closes and the thumbnail is changed.
Note:
• You can view the change in the thumbnail position (number
of frames from the beginning) in the "THUMBNAIL" item of
the clip information display. The thumbnail of a normal first
frame is indicated as 0.
• Even if a thumbnail is changed, playback from the thumbnail
screen will be from the beginning of the clip.
• When a text memo clip with different settings for the "SYS-
TEM MODE" (➝ page 114) menu item is displayed,
may be displayed instead of the thumbnail for the text memo
position displayed at the bottom.
Main Mode: Thumbnail Screen
indicator
51
Advertisement
Table of Contents
