Panasonic AJ-PG50EJ Operating Instructions Manual page 104

I/F SETUP > VIDEO (Continued)
Item
Selects the 3G-SDI output format for when "LINE&FREQ" (➝ page 114) is "1080-59.94P" or
"1080-50P."
3G-SDI OUT
LEVEL-A: Selects the 3G-SDI LEVEL-A format.
LEVEL-B: Selects the 3G-SDI LEVEL-B DL format.
Selects the aspect ratio for down-conversion output.
FIT-V:
Changes the ratio to match the input size to the output size along the vertical axis. (The as-
pect ratio is maintained.)
FIT-H:
DOWNCON MODE
Changes the ratio to match the input size to the output size along the horizontal axis. (The
aspect ratio is maintained.)
FIT-HV:
Changes the ratio to match the input size to the output size along the horizontal and vertical
axes. (The aspect ratio may be distorted.)
AUDIO
I/F SETUP > AUDIO
Item
Selects the audio input signal.
INPUT SEL V IN SEL: Selects the same signal as the VIDEO input signal selection.
ANALOG: Selects the ANALOG AUDIO IN connector.
Selects the level for the CH1 analog audio input.
4 dB
INPUT CH1 LEVEL 0 dB
-3 dB
-20 dB
Selects the level for the CH2 analog audio input.
4 dB
INPUT CH2 LEVEL 0 dB
-3 dB
-20 dB
Sets the audio to output to the monitor outputs. Select the outputs for L and R. HDMI output
audio is also in accordance with this setting.
CH1 / 2: Outputs CH1 to L and CH2 to R.
MONITOR CH
CH3 / 4: Outputs CH3 to L and CH4 to R.
CH1 + 2 / 3 + 4: Outputs CH1+2 to L and CH3+4 to R.
CH1 + 3 / 2 + 4: Outputs CH1+3 to L and CH2+4 to R.
Turns on/off speaker output.
SPEAKER OUT ON: Outputs from the speakers.
OFF: Does not output from the speakers. (Beep sounds are also not output.)
Selects the standard level.
FS-20: -20 dB
REF LEVEL
FS-18: -18 dB
FS-12: -12 dB
104
Setup Menu: Menu List
Settings and brief function description
Settings and brief function description
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
_ is the factory default setting.
FREQ indications
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz
59.94Hz 50Hz