Table of Contents
Advertisement
Warning Details
When an error is detected after the power is turned on or during operation, the
you that an error has occurred.
Note:
If multiple errors occur simultaneously, the one with the highest priority is displayed.
1.
System error
Monitor display
Displays the error code.
(power) lamp
Flashes 4 times per second.
Card Access Lamp
Beep sound
Repeats rapidly.
Warning description
A reference signal error or communica-
tion error occurred.
Recording/playback
Stops.
operation
Measure
Check the error code table and consult
with your dealer.
2.
Format inconsistency
Monitor display
Displays the error code.
(power) lamp
Flashes 4 times per second.
Card Access Lamp
Beep sound
Repeats rapidly.
Warning description
SYSTEM mode is internally inconsistent
and a restart is required.
Recording/playback
Not possible
operation
Measure
Turn the power off and then back on as
described in the message and then
check that an error is not displayed.
Warning System
3.
Card eject error
Monitor display
Card Access Lamp
Beep sound
Warning description
Recording/playback
operation
Measure
4.
Recording error / recording stopped
Monitor display
Card Access Lamp
Beep sound
Warning description
Recording/playback
operation
Measure
For Long and Trouble-Free Operation: Warning System
(POWER) lamp and a beep sound notify
Displays the error code.
(power) lamp
Flashes 4 times per second.
Repeats rapidly.
An error occurred in the internal memo-
ry of the unit because a P2 card was re-
moved during access.
Not possible
Turn the power off and then back on as
described in the message. Check that
there is no problem with the clips on the
removed card and repair the clips if
necessary.
Displays "REC WARNING."
(power) lamp
Flashes 4 times per second.
Repeats rapidly.
• An error has occurred with the record-
ing circuit settings.
• Recording cannot continue due to an
error.
Recording may continue or may stop.
Refer to "Display of warning informa-
tion" (➝ page 120).
119
Advertisement
Table of Contents
