Table of Contents
Advertisement
Installation
1
Connect the AC power cable.
Connect the AC power cable in the order indicated in the
figure.
To power outlet
(1)
(2)
Removal
lamp
1
1
Press the [
] button for two seconds to turn the
power off, and confirm that the
off.
2
Remove the DC power cable plug.
Note:
If the power is on, be sure to turn it off before removing the DC
power cable plug.
Using the AC Adaptor
lamp has turned
2
Insert the DC power cable plug into the DC IN con-
nector.
3
Clamp the DC cord.
Clamp
3
Disconnect the AC power cable (for the AC adaptor)
from the power outlet.
Note:
• The AC adaptor is designed to operate with all power supply
voltages (100 V to 240 V) and frequencies (50 Hz/60 Hz)
around the world. However, the shape of the power outlet
differs depending on the country. Use a plug that is de-
signed for the country of use. If necessary, contact your sup-
plier to obtain the appropriate plug adaptor.
• When you will not use the unit, disconnect the AC power ca-
ble (for the AC adaptor) from the power outlet.
Preparation: Using the AC Adaptor
23
Advertisement
Table of Contents
