Viewing And Editing The Clip Information - Panasonic AJ-PG50EJ Operating Instructions Manual

Viewing and Editing the Clip Informa-
tion
Viewing the clip metadata information
The detailed information of a clip can be displayed and
checked on a screen.
1
Use the cursor buttons to align the cursor with the tar-
get clip.
2
Use the cursor buttons to align the cursor with the
"CLIP PROPERTY" (➝ page 92) menu item and
press the [SET] button.
The information on the selected clip appears.
1)
2)
4)
1)
Clip number
2)
Thumbnail
3)
Information added to clips
Displays various indicators inserted in the clip and the
number of text memos added to the clip. The
is also displayed if the P2 card containing the clip is
write protected.
4)
Clip information
The following information is displayed.
CLIP NAME: Clip name
START TC: Time code at start of recording
START UB: User bit value at start of recording
DATE: Date recorded
TIME: Time at start of recording
DURATION: Clip length
V_FORMAT: Clip recording format
FRAME RATE: Playback frame rate
REC RATE: Recording frame rate
5)
Clip metadata
Displays the items for viewing detailed information (clip
metadata) on the clip.
50
Main Mode: Thumbnail Screen
3)
3
View the clip metadata if necessary.
Use the cursor buttons to align the cursor with a metadata
item and press the [SET] button to display the following in-
formation.
Note:
The bold items are clip meta data that can be changed.
GLOBAL
CLIP ID:
USER CLIP
NAME:
VIDEO:
5)
AUDIO:
ACCESS:
DEVICE:
mark
SHOOT:
SCENARIO:
NEWS:
MEMO:
Global clip ID
(This is a unique number, and there is
no clip anywhere in the world with the
same number.)
The clip name the user assigns. This
normally includes the GLOBAL CLIP
ID.
Video signal system
(FRAME RATE, PULL DOWN, ASPECT
RATIO)
Audio channel system and other infor-
mation
(SAMPLING RATE, BIT RATE)
The date of the last update and other
information
(CREATOR, CREATION DATE, LAST
UPDATE DATE, LAST UPDATE PER-
SON)
Manufacturer, serial number, and
model name of the recording device.
Date when recording started and end-
ed, etc.
(SHOOTER, START DATE, END
DATE, ALTITUDE, LONGITUDE, LAT-
ITUDE, SOURCE, PLACE NAME)
Program name, scene number, and
other information
(PROGRAM NAME, SCENE NO.,
TAKE NO.)
Reporter, purpose, and object
Text memo number, OFFSET, PER-
SON, TEXT
Note:
• The position is indicated by the number
of frames from the start.
• Up to 1000 characters of text can be
added, but only the first 500 characters
will be displayed.
• Use the left or right cursor button to
move text numbers.