Screen Display; Osd Display - Panasonic AJ-PG50EJ Operating Instructions Manual

The OSD screen display toggles on and off each time you press the [DISPLAY] button.
The formats, time codes, and modes are displayed as abbreviations on the playback and recording screens.
Note:
• Select whether to display the level meter on this display in the "OSD GRADE" (➝ page 108) menu item.
You can also select the display items in the "OSD TC SELECT" (➝ page 108) menu item.
• Switch the output destination to display in the "OSD OUTPUT" (➝ page 108) menu item.
• You can change the display position of time codes and other indicators that appear at the bottom of the screen in the "CHARA V
POSI" menu item (➝ page 108).
11
6
3
1.
Time codes and other displayed information
CTL Relative location from the beginning
TCR Recorded time code data
TCR. Time code data recorded in the VAUX area
UBR Recorded user bit data
UBR. User bit data recorded in the VAUX area
TCG Time code data of the time code generator
UBG User bit data of the time code generator
TIME Time information recorded in the subcode
DATE Date information recorded in the subcode
Note:
• "TR" or "UR" is displayed when data could not be read
from a P2 card properly.
• "" is displayed after the frames in the 2nd and 4th fields.
• In drop-frame mode, a period "." is used instead of a colon
":" after seconds.
84
Screen Display: OSD Display

Screen Display

OSD Display

12 13
4
9
5 7
2.
Remaining space on the card
The remaining space (available recording time) on the
card is indicated in minutes.

R indicates the amount of remaining recording space.

r indicates the amount of remaining proxy recording
space.
Note:
• 600 minutes and longer time periods are indicated in hours
with an "h" appended after the number.
• When the remaining time and card length information are not
defined, the indication is blank.
• Time exceeding 99 hours is indicated as 99 h.
• When recording to an SD memory card with proxy recording
is not possible (for example, when the remaining space on
the SD memory card is 0), "r" (remaining proxy record-
ing space) flashes.
3.
Operating status display
Indicates the current deck status.
4.
Clip number
Indicates the clip number of the displayed thumbnail.
10
2
8