Panasonic AJ-PG50EJ Operating Instructions Manual page 56

Automatic CPS authentication
A CPS password can be read from a SD memory card or input
into the unit.
 Setting the password
Loading the CPS password from an SD memory
card
1
Download the latest version of P2 Viewer Plus to the
personal computer and then install it.
2
Generate a CPS password with P2 Viewer Plus and
then write it to an SD memory card.
Note:
• The generated CPS password file is encrypted, but take ap-
propriate measures to avoid security risks. For example, for-
mat the SD memory card when the file is no longer needed.
• The generated CPS password is generated as a file with the
".p2p" extension in private/meigroup/pavcn/sbg/p2sd/ of
the SD memory card. Do not delete this file until it has been
loaded by the device.
3
Load the CPS password file.
ATurn on the power of the unit and then insert the SD
memory card into the SD card slot.
BOpen the thumbnail screen.
CSelect the "CPS PASSWORD" - "LOAD" (➝ page 92)
menu.
DSelect the file to use from the displayed password file list
and press the [SET] button.
• When loading of the CPS password is successful, the
"LOADINGPASSWORD COMPLETED!" message ap-
pears.
• When loading of the CPS password fails, a warning mes-
sage appears. For details on the warning, refer to "Warn-
ing Details" (➝ page 119).
• If a warning message is displayed, check the insertion
status of the SD memory card, the save location of the
CPS password file (file name: .p2p) generat-
ed in step 2, etc.
56
Main Mode: Thumbnail Screen
Setting the CPS password with the software key-
board
1
Select the "CPS PASSWORD" - "SET" (➝ page 92)
menu item.
The software keyboard for entering the CPS password ap-
pears.
2
Enter the CPS password with the software keyboard
When you enter the password in "PASSWORD" and in
"RETRY PASSWORD" for verification and then select
"OK," the CPS password is set.
• When CPS password input is successful, the "SETTING
PASSWORD COMPLETED!" message appears.
• When CPS password input fails, a warning message ap-
pears. For details on the warning, refer to "Warning De-
tails" (➝ page 119).
Note:
• Up to 16 characters can be set for the password.
• Do not forget the password you entered because it cannot
be displayed on a device.
 Deleting the password
When you no longer need to use the CPS function, delete the
CPS password.
To delete the CPS password, select the "CPS PASSWORD" -
"DELETE" (➝ page 92) menu item.
"DELETING PASSWORD COMPLETED!" appears and the
CPS password is deleted.
Note:
When the setting becomes unset after deletion of the CPS pass-
word, automatic authentication of microP2 memory cards and the
encrypted format function are disabled.