Table of Contents
Advertisement
• Sounder circuits SND1÷SND4
(4-Sounder Expander)
• Fault Relay, volt free changeover contacts* +12V/ 1A or 24V/ 0.5A
• Fire Relay, volt free changeover contacts*
* Note: These functions may not be used to
provide any "Options with requirements" as
specified in EN54-2.
• Auxiliary output
▪ Cabling of the main power supply:
• Recommended wires cross section
• Terminal maximum wire diameter
▪ Environment:
• Working temperature
• Storage temperature
• Humidity
2.2 General Technical Specifications of Relay Module MR8
▪ Number of relays:
▪ Power supply:
▪ Current consumption in normal condition:
▪ Additional current consumption for every
relay switched ON:
▪ Maximum ratings of volt-free changeover
contacts:
▪ Maximum voltage:
▪ Maximum consumption:
▪ Cabling:
• Recommended wires cross section
• Terminal maximum wire diameter
▪ Environment:
• Working temperature
• Storage temperature
• Humidity
WARNINGS:
Prior to connecting the MAG8Plus Fire Alarm Panel, perform a thorough
test of the all wiring integrity of the entire system.
!
Should a fault arise during installation and connection, which cannot
be removed, stop the installation and call the producer or his regional
authorized representative!
TEChNICAL SUPPORT hELP
TEL.: +359 (2) 9694 800
MAG8Plus - Installation and Operation Manual
+24V/ 0.15A
Fuse, Resettable (PTC)
= 125V; I
= 2A
U
MAX
MAX
+12V/ 1A or 24V/ 0.5A
= 125V; I
= 2A
U
MAX
MAX
+24V DC/ 0,3А
Fuse, Resettable (PTC)
1.5mm
2
Ø2.5mm
-5 ÷ +40ºС
-20 ÷ +60ºС
Up to 93% (non condensing)
8
24V
8mA
10mA
12V/ 1A or 24V/ 0.5A
125V
2A
1.5mm
2
Ø2.5mm
-5 ÷ +40ºС
-20 ÷ +60ºС
Up to 93% (non condensing)
5
Advertisement
Table of Contents
