Main Power Source - Teletek electronics MAG8Plus Installation And Operation Manual

Fire control panel
Table of Contents

Advertisement

3.5 Main Power Source

Connecting of the Main Power Source
Connecting to the Battery
Figure 12.
Attention: It is possible that the battery might not be charged at the panel initial start-up.
In this case the BATT LOW/LOST at the control module and the GENERAL FAULT at
the front panel will light on until the battery will be charged up to the required level.
10
MAG8Plus - Installation and Operation Manual
The yellow-green
earthing cable of the
!
main power source
must be connected
to the middle point of
the terminal!
Figure 11.

Advertisement

Table of Contents
loading

Table of Contents