Teletek electronics MAG8Plus Installation And Operation Manual page 25

"One Man" Test
The "One Man" Test mode gives the installer the possibility to test the efficiency of the
system - whether the detectors react to smoke, heat, etc.
To "One Man" Test a zone:
• Press
• Press
with the system testing:
Continue the system testing by pressing the
Man" Test mode is automatic after the end of the test procedure in the last zone, or at
any time by pressing
!
A sound signalization is activated at every Service Mode entering .
The signalization is deactivated by pressing
button:
button to continue
button.
MAG8Plus - Installation and Operation Manual
TEST LED will start blinking.
The ZONE 1 LED blinks in yellow
(2 blinks per second).
ZONE 1 is in test mode.
Test a detector from this zone whether it
react to smoke, heat, etc.
MAG8Plus will activate the sounders
for about 2 seconds to confirm the
provoked fire alarm.
TEST LED will continue blinking.
The ZONE 1 LED lights out (the zone is
not longer in test mode).
The ZONE 2 LED blinks in yellow
(2 blinks per second).
ZONE 2 is in test mode.
Test a detector from this zone whether it
react to smoke, heat, etc.
MAG8Plus will activate the sounders
for about 2 seconds to confirm the
provoked fire alarm.
button. The exit from the "One
button.
25