Power Supply Unit - Furuno FAR-2228 Installation Manual

2.6

Power Supply Unit

2.6.1 How to fabricate cables
For locations of cables and cores, see the sticker on the reverse side of the top cover.
(All dimensions in millimeters)
For how to connect the LAN modular plug, see "LAN cable" on page 2-5. For how to
connect the WAGO connector, see "WAGO connector" on page 2-6.
RW-0013/RW-0030/03CA00099 (for Antenna cable)
<RW-0013/03CA00099>
(unit: mm)
Outer sheath
Vinyl tape
Clamp position
(Wrap the outer shield a single time.)
NOTE: Do not wrap the shield more than twice.
<RW-0030>
(unit: mm)
Outer sheath
Vinyl tape
Clamp position
(Wrap the outer shield a single
time on the inner sheath.)
NOTE: Do not wrap the shield
more than twice.
200 200
30 30
Inner shield Inner shield
（360） （360）
30 30
Armor
Inner sheath
200 200
Inner shield Inner shield
330 330
6
Coaxial cable Coaxial cable
Inner shield Inner shield
Outer shield Outer shield
Crimp-on lug
FV5.5-3,
supplied
330 330
6
Coaxial cable Coaxial cable
Inner shield Inner shield
Outer shield Outer shield
Crimp-on lug
FV5.5-3,
supplied
2. WIRING
Fabrication of the coaxial cable
14 14 14 14
5 5
Folded shield
*: For 03CA00099 cable, do not
fold the shield as shown in
the following.
14 14 14 14
5 5
Fabrication of the coaxial cable
14 14 14 14
5 5
Folded shield
2-47