Safety Instructions - Furuno FAR-2228 Installation Manual

Hide thumbs Also See for FAR-2228:
Table of Contents

Advertisement

SAFETY INSTRUCTIONS

The installer must read the applicable safety instructions before attempting to operate or install the
equipment.
DANGER
WARNING
CAUTION
Warning, Caution
Wear a safety belt and hard hat when working on the antenna unit.
Serious injury or death can result if someone falls from the radar antenna mast.
WARNING
Do not open the equipment.
This equipment uses high voltage
electricity which can shock, burn or
cause serious injury. Only qualified
personnel can work inside the equipment.
Construct a suitable service platform
from which to install the antenna unit.
Serious injury or death can result if
someone falls from the radar antenna
mast.
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury can
result if the power is left on or is applied
while the equipment is being installed.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the
equipment.
Indicates a potentially hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Prohibitive Action
DANGER
Mandatory Action
WARNING
Use only the specified power cable.
Fire or damage to the equipment can
result if a different cable is used.
Do not install the units (other than the
antenna unit) in a dusty environment,
or one where the units may get wet
from rain or water splash.
Dust or water in the units can result in
fire, electrical shock, or damage to the
equipment.
Attach protective earth securely to the
ship's body.
The protective earth (grounding) is
required for the AC power supply to
prevent electrical shock.
CAUTION
For FAR-2x58 radars, turn the
Processor Unit and the Power
Supply Unit off before maintenance.
i

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents