Kohler Decision-Maker 1 Manual page 88

Refer
Status Event to
or Fault
Menu
EPS (Emergency 10
Power System)
Supplying Load
Field Overvoltage
(see D04)
Fuel Level (see A04)
Fuel Valve Relay ]
10
Generator Set 10
Running
Ground Fault 10
Detected
High Battery Voltage 10
High Coolant 10
Temperature
Shutdown
High Coolant 10
Temperature Warning
High Oil Temperature 10
Shutdown
High Oil Temperature 10
Warning ] [[
Idle (speed) Mode
Function (see D21)
In Synch w
10
Intake Air 10
Temperature
Shutdown [[
Intake Air Temp. 10
Warning [[
Intake Air Temp.
Warning (see A03) ]
Intake Air Temp.
Shutdown (see
A03)]
Internal Fault 10
Shutdown
J1939 CAN
Shutdown (see
Engine J1939 CAN
Shutdown)
Knock Shutdown
(see D13) ]
kW Overload
(see Load Shed)
Load Shed 10
kW Overload ]]
Load Shed Over 10
Temperature [[
(Activated by a High
Coolant Temp.
shutdown)
* All models, except Waukesha-powered models.
[ Non-paralleling applications
] Waukesha-powered models
w Paralleling applications
88 Section 5 Decision-Makerr 550 Controller
Relay
Driver
Output
(RDO)
Digital Display
EPS RDO-22
SUPPLYING
LOAD
RDO-23 ]
FUEL VALVE
RELAY
RDO-15
(lead 70R)
GROUND
FAULT
HIGH RDO-13
BATTERY
VOLTAGE
HI COOL TEMP RDO-03
SHUTDOWN (lead 36)
HI COOL TEMP RDO-06
WARNING (lead 40)
HI OIL TEMP
SHUTDOWN
HI OIL TEMP
WARNING
IN SYNCH RDO-29 *
INTAKE AIR
TEMP SDWN
INTAKE AIR
TEMP WARN
INTERNAL
FAULT
RDO-30 ]]
LOAD SHED
KW OVER
LOAD SHED RDO only
OVER
TEMPERATURE
Default
Selection
Range Setting
Fixed 1% of rated
line current
14.5--16.5 V (12 V) 16 V (12 V)
29--33 V (24 V) 32 V (24 V)
80%--120% 100% of kW
rating with
5 sec. delay
** NFPA applications
[[ DDC/MTU engine with MDEC/ADEC
]] FAA only
Inhibit
Time Time
Delay User-Defined
Delay
Settings
(sec.) (sec.)
Not adjustable
Not adjustable
—
Not adjustable
Not adjustable
Not adjustable
10
30 5 Not adjustable
30 Not adjustable
30 5 Not adjustable
30 Not adjustable
—
Not adjustable
30 Not adjustable
30 Not adjustable
—
—
Not adjustable
—
—
—
2--10
Not adjustable
TP-6356 4/12