Kohler Decision-Maker 1 Manual page 78

d. Use the controller keypad to go to Menu 20,
Factory Setup. See Figure 5-7 or Figure 5-8 for
displays.
e. Arrow down to the SETUP LOCK display.
If the SETUP LOCK display indicates YES, go
to step f. If the SETUP LOCK display indicates
NO, go to step g.
FACTORY SETUP
FINAL ASSEMBLY DATE
01-JAN-90
FINAL ASSEMBLY
CLOCK NO. 00000
OPERATING DAYS
MODEL NO.
(26 CHARACTERS MAX)
SPEC NO.
(16 CHARACTERS MAX)
GENSET SERIAL NO.
#
ALTERNATOR PART NO.
#
ENGINE PART NO.
#
SERIAL NO.
?
CONTROLLER SERIAL NO.
?
CODE VERSION
COPYRIGHT XXXX
SETUP LOCK
Figure 5-7 Menu 20, Factory Setup
(prior to version 2.10)
78 Section 5 Decision-Makerr 550 Controller
ENTER CODE
(UNLOCKS SETUP)
#
# INITIALIZE EEPROM? Y/N
Y/N
MENU 20
FACTORY SETUP
FINAL ASSEMBLY DATE
DD/MM/YY
FINAL ASSEMBLY
CLOCK NO ?
OPERATING DAYS
MODEL NO
SPEC NO
?
GENSET SERIAL NO
ALTERNATOR PART NO
ENGINE PART NO
SERIAL NO
CONTROLLER SERIAL NO
CODE VERSION
COPYRIGHT
SETUP LOCKED
Figure 5-8 Menu 20, Factory Setup
(version 2.10 or higher)
ENTER CODE
(UNLOCKS SETUP)
#
#
#
#
#
#
#
# INITIALIZE BLOCK?
XXXX (data block failure code)
INITIALIZE EEPROM? Y/N
YES
TP-6356 4/12
?
Y/N