Table of Contents
Advertisement
8.8
System Maintenance
LOG FILES page
Click the buttons to download OCPP or HMI logs.
The downloaded log files are shown after a few seconds.
FIRMWIRE UPDATE page.
Click the Upload button to upload a firmware update file from
your computer,
After the file is uploaded, click the Update button to start the
firmware update.
When the update is in progress, the charger's LED indicator
continuously lights up in red. After the firmware update is fin-
ished, the charger restarts automatically. You can find the latest
firmware version of your charger in the webconfig UI on the
main page.
CONFIGURATION AND BACKUP page
The CONFIGURATION AND BACKUP page enables you to
backup the system.
To start a restore, click the Restore Config File button and up-
load the backup file. The system only accepts the .bak files.
5111967A OI-II Webasto Unite
SYSTEM RESET Page
The SYSTEM RESET Page enables you to perform a Soft Reset
and Hard Reset by clicking the relevant buttons.
Soft Reset means that the charger is reset as soon as the char-
ger is in its idle state.
Hard Reset means that the charger will reset immediately re-
gardless of the charger's current state.
FACTORY DEFAULT CONFIGURATION page
The FACTORY DEFAULT CONFIGURATION page enables you to
apply a factory reset to the charger.
Unite Configuration Interface | 8
25 / 37
Advertisement
Table of Contents
