Figure 5- 22 Watering System Standard Screens - Webasto SVS300 Installation, Operation And Maintenance Manual

SVS-200
Watering System
Configuration
CLEAR
Water System Config
OFF
Water System Type:
Custom Mode
New Water System Type:
Custom Mode
Valve Turn On Time:
ON Time: 00:00 Min
CLEAR
Press ENTER and use the UP and
DOWN arrow buttons to set the
parameter to the appropriate value.
Press ENTER again to accept the
selection made.
Press CLEAR to retain the original value
Press ENTER to RUN
Water System Test
Watering..............
CLEAR
Please wait 30 sec.
Watering..............
Press STOP to end
STOP Valve On Time out
20153-W-03-01
IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS
ENTER
SELECT
ENTER/CLEAR
ENTER
SELECT
ENTER
CLEAR
ENTER
after 30s countdown

Figure 5- 22 Watering System Standard Screens

Charger Configuration
CLEAR
New Water System Config
ON
SELECT
New Water Sys Type:
BFS High Pressure
New Water Sys Type:
BFS Low Pressure
New Water Sys Type:
Flow-Rite High Press
New Water Sys Type:
Flow-Rite Low Press
New Water Sys Type:
Phil Scientific
New Water Sys Type:
WaterMaster
New Water Sys Type:
Philadelphia Low Prs
36
Installation, Operation and Maintenance
Water System Config
ON
Webasto Charging Systems, Inc.
SELECT
ENTER