Security; Boot - Nexcom FTA 5180 Series User Manual

Chapter 3: BIOS Setup

Security

Aptio Setup - AMI
Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
Version 2.22.1283. Copyright (C) 2022 AMI
Administrator Password
Select this to reconfigure the administrator's password.
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.

Boot

Set Administrator
Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Setup Prompt Timeout
Selects the number of seconds to wait for the setup activation key.
65535(0xFFFF) denotes indefinite waiting.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
54
Aptio Setup - AMI
Boot Configuration
Setup Prompt Timeout
3
Bootup NumLock State [On]
Quiet Boot [Disabled]
Boot mode select [UEFI]
AMI Virtual Devices [Disabled]
FIXED BOOT ORDER Priorities
[Hard Disk]
Boot Option #1
Boot Option #2 [CD/DVD]
Boot Option #3 [USB Hard Disk]
Boot Option #4 [USB CD/DVD]
[USB Key: UEFI:
Boot Option #5
KingstonDataTraveler
3.0, Partition 1]
Boot Option #6 [USB Floppy]
[USB Lan]
Boot Option #7
Boot Option #8 [Network]
USB Key Drive BBS Priorities
Version 2.22.1283. Copyright (C) 2022 AMI
Boot
Number of seconds to
wait for setup
activation key.
65535 (0xFFFF) means
indefinite waiting.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
FTA5180 Series User Manual