Nexcom FTA 5180 Series User Manual page 62

Chapter 3: BIOS Setup
System Self Test Log
Aptio Setup - AMI
Log area usage = 02 out of 20 logs
Erase Log [Yes, On every reset]
When log is full [Clear Log]
DATE TIME STATUS CODE
04/13/2022 14:33:01 Internal Use Area of BMC
FR
04/13/2022 14:33:01 BMC soft fail
Version 2.22.1283. Copyright (C) 2022 AMI
Erase Log
Configures the erase log options.
When Log is Full
Configures the action to perform when log is full
Copyright © 2022 NEXCOM International Co., Ltd. All Rights Reserved.
BMC Network Configuration
Server Mgmt
Erase Log Options
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Configuration Address
Select to configure LAN channel parameters statically or dynamically (by BIOS
or BMC). Unspecified option will not modify any BMC network parameters
during BIOS phase.
49
Aptio Setup - AMI
--BMC network configuration--
*********************
Configure IPv4 support
*********************
Lan channel 1
Configuration Address [Unspecified]
source
Current configuration DynamicAddressBmcDhcp
Address source
Station IP address 0.0.0.0
Subnet mask 0.0.0.0
Station MAC address 1E-ED-26-4A-CE-43
Router IP address 0.0.0.0
Router MAC address 00-00-00-00-00-00
**********************
Configure IPv6 support
Version 2.22.1283. Copyright (C) 2022 AMI
Server Mgmt
Select to configure LAN
channel parameters
statiscally or
dynamically (by BIOS or
BMC). Unspecified
option will not modify
any BMC network
parameters during BIOS
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
FTA5180 Series User Manual